Titanium filters are made of ultrapure titanium using special process through sintering. Their porous structure is uniform and stable, having high porosity and high interception efficiency. Titanium filters are also temperature insensitive, anticorrosive, highly mechanical, regenerative, and durable, applicable to filter various gases and liquids. In particular, they are widely used in pharmacy industry for removing carbon.

Sterility test pump based on the principle of membrane filtration. The pump give positive pressure transmit liquid sample to the canister and filtered under positive pressure. After filtration, the filter membrane is washed to remove the antimicrobial agent of the product, and then the culture medium is filled in the filter to check whether the sample contains bacteria

The on-line gloves Integrity Tester GT-3.0 are leak detector principle proposed by GB/T 25915.7-2010/ISO 14644-7:2004, and it is a dedicated instrument to detect the gloves leakage. The simple and easy design won't need any additional equipment, no need to remove the gloves, with fast detection speed and high precision.

TA - 3.0 independent research and development by our company which is to make a tiny adjustment on the basis of TA - 2.0, where the instrument shell adopts 304 stainless steel design,greatly improving the equipment
adaptability in different environments. It can meet the choice of two different schemes for the single point of real-time monitoring or multiple point time-division monitoring, not only meeting the requirements of national laws and regulations, but also saving investment, where we have several successful cases.

It is suitable for sealing integrity testing of pharmaceutical packaging to prevent moisture, oxygen, and microorganisms from contaminating products. Medicines: bottled, bagged, boxed, ampoules, vials, cartridges, prefilled needles (PFS), (BFS), (FFS), etc.
Spray cans: plunger spray cans; bag-lined spray cans; "energy jacket" spray cans; flexible tube spray cans.

※ It can't directly illuminate to a person's skin, especially a person's eyes;
※ Do not use your hand to directly contact with the tube;
※ Please wear sterile gloves before using and use alcohol to wipe the quartz tube;
※ Please contact the manufacturer in time of use;

The freezing point osmometer FPOSM-V2.0 produced by our company with independent research and development is in accordance with Raoul freezing point theory, based on the solution freezing point declined value proportional to the solution molar concentration, using high sensitivity of temperature-sensing element, to measure the freezing point of different solutions, so as to derive the osmotic pressure molar concentration. This theory has been widely used for the test and research of osmotic pressure molar concentration in the fields such as pharmaceuticals,pharmaceutical analysis, biological and food therapy

Model：IntegtestV4.0
Introduction

Integtest ® Serials Integrity Tester are designed for testing integrity of filters and filter systems . The State Pharmacopoeia and GMP specification requirements. The V4.0 Integrity Tester is compact, handy to use, and fully automated integrity test instrument, which performs bubble point, diffusion flow, enhanced bubble point, and water-based test for hydrophobic filters.

The on-line gloves Integrity Tester GT-2.0 produced by Beijing Neuronbc Laboratories is designed according to the positive pressure leak detector principle proposed by GB/T 25915.7-2010/ISO 14644-7:2004, and it is a dedicated instrument to detect the gloves leakage. The simple and easy design won't need any additional equipment, no need to remove the gloves, with fast detection speed and high precision.

Beijing Neuronbc was established in 2004. After more than ten years of development, At present, we have thousands of pharmaceutical enterprise customers, We believe our quality products and service, will be your correct choice.

Glove Integrity Tester GT-5.0 is based on Gt-2.0 3.0 R&D by Neuronbc, very mature teconlogy,it is good choice for you.

Autosampler can be used with TOC analyzer in the multi samples analysis, positioning the sample level analysis automatically, so that the inspectors can be free from the boring waiting for analysis.