The on-line glove integrity tester WGT-1200 produced by our company is designed according to the principle of the positive pressure leak detector recommended by GB/T 25915.7-2010/ISO 14644-7:2004. It is a special instrument for detecting leakage of gloves.

Plate type filter consist of single plate and double plate, choose high-quality stainless steel 304 or 316L stainless steel, with a pressure tank or peristaltic pump as a source of pressure, is filtered by positive pressure, in full compliance with the GMP standard of the medicine industry, applicable to small pharmaceutical factory, food and beverage, factories and hospitals for liquid clarification and filtration sterilization. With a ladder shaped hose interface, easy to use.

Cartridge filter media is a hydrophobic PTFE membrane, applicable to pre-filtering of gas and solvent and sterilization. Its hydrophobicity is 3.75 times stronger than the erosion resistance capability of ordinary PVDF; thus, filters are applicable to pre-filtering and precise filtration of gas and solvent sterilization. At present, they are widely applied in pharmacy, food, chemical industry, and electronics, which show excellent heat resistance, they can be repeatedly used in online steam sterilization or high-pressure disinfection. NWF cartridges also have high interception efficiency, high guarantee, and long service life.

Glove Integrity Tester GT-5.0 is based on Gt-2.0 3.0 R&D by Neuronbc, very mature teconlogy,it is good choice for you.

The on-line glove integrity tester WGT-1000 produced by our company is designed according to the principle of the positive pressure leak detector recommended by GB/T 25915.7-2010/ISO 14644-7:2004. It is a special instrument for detecting leakage of gloves. Our company has been engaged in the production and sales of filter integrity testers for many years, and the pressure control technology is very mature.
The device uses a wireless communication mode, built-in air pump and lithium battery, through systematic management, so that multiple detection units can be linked in real time. In addition to complying with the requirements of FDA and GMP and other laws and regulations, four-level authority management and electronic signature design are also set up to comply with 21CFR part 11 electronic records and electronic signature certification requirements; The history record can store more than 12000 groups, and at the same time, it has its own storage FLASH, which can transmit and save the test records in time; the structure design is simple and exquisite, no additional equipment is required, no need to remove gloves, and the glove tray can be replaced, supporting different specifications and sizes of gloves Detection. The high-precision pressure sensor is adopted, and the glove test is fast and accurate.

The on-line gloves Integrity Tester GT-2.0 produced by Beijing Neuronbc Laboratories is designed according to the positive pressure leak detector principle proposed by GB/T 25915.7-2010/ISO 14644-7:2004, and it is a dedicated instrument to detect the gloves leakage. The simple and easy design won't need any additional equipment, no need to remove the gloves, with fast detection speed and high precision.

TOC TA -5.0 Total Organic Carbon Analyzer is R&D production independently by Beijing Neuronbc Laborataries Co.,Ltd.,It is used for testing the total organic carbon (TOC)concentration in water samples,which range from 1 to 1000ppb, with high sensitivity and accuracy.
TOC TA-5.0 Total Organic Carbon Analyzer is composed of 1 set of TOC-D500 Total Organic Carbon (TOC) data terminal instrument and most up to 8 units of TA-5.0 total organic carbon (TOC) detection unit instrument. The data terminal instrument is responsible for collecting and displaying the data of each detection unit, which has the function of data storage, printing, alarming, etc. Each detection unit has its own oxidation detector, to detect the TOC of water samples of each monitoring point.

Model：IntegtestV4.0
Introduction

Integtest ® Serials Integrity Tester are designed for testing integrity of filters and filter systems . The State Pharmacopoeia and GMP specification requirements. The V4.0 Integrity Tester is compact, handy to use, and fully automated integrity test instrument, which performs bubble point, diffusion flow, enhanced bubble point, and water-based test for hydrophobic filters.

The Model NBC-5150 can confirm the class of the clean room and print out the test results quickly, and meets ISO 14644 requirements. The instrument measures the no. of particles in 8 particle size channels simultaneously, with 5000 samples record storage. It is widely used in measuring particles in clean rooms and in evaluating the quality of indoor air. It also used for testing the performance of HEPA filters. It has a Stainless Steel Housing. It is very Portable.

Sterility test pump based on the principle of membrane filtration. The pump give positive pressure transmit liquid sample to the canister and filtered under positive pressure. After filtration, the filter membrane is washed to remove the antimicrobial agent of the product, and then the culture medium is filled in the filter to check whether the sample contains bacteria

Name:Sterility Testing Kits
Model
Company Name: Beijing Neuronbc Laboratories Co.,Ltd.

Titanium filters are made of ultrapure titanium using special process through sintering. Their porous structure is uniform and stable, having high porosity and high interception efficiency. Titanium filters are also temperature insensitive, anticorrosive, highly mechanical, regenerative, and durable, applicable to filter various gases and liquids. In particular, they are widely used in pharmacy industry for removing carbon.