Sterility test pump based on the principle of membrane filtration. The pump give positive pressure transmit liquid sample to the canister and filtered under positive pressure. After filtration, the filter membrane is washed to remove the antimicrobial agent of the product, and then the culture medium is filled in the filter to check whether the sample contains bacteria
It is suitable for sealing integrity testing of pharmaceutical packaging to prevent moisture, oxygen, and microorganisms from contaminating products. Medicines: bottled, bagged, boxed, ampoules, vials, cartridges, prefilled needles (PFS), (BFS), (FFS), etc.Spray cans: plunger spray cans; bag-lined spray cans; "energy jacket" spray cans; flexible tube spray cans.
Autosampler can be used with TOC analyzer in the multi samples analysis, positioning the sample level analysis automatically, so that the inspectors can be free from the boring waiting for analysis.
Stainless steel filters housing fall into fixed filters and flip filters. Filter housings can be designed into upper and lower openings or left and right openings. The cartridges are made of titanium using sinter technology. Conventional connectors fall into 226 screws and M20 screws. Special specifications can be tailor made for customers based on their requirements.
Plate type filter consist of single plate and double plate, choose high-quality stainless steel 304 or 316L stainless steel, with a pressure tank or peristaltic pump as a source of pressure, is filtered by positive pressure, in full compliance with the GMP standard of the medicine industry, applicable to small pharmaceutical factory, food and beverage, factories and hospitals for liquid clarification and filtration sterilization. With a ladder shaped hose interface, easy to use.
※ It can't directly illuminate to a person's skin, especially a person's eyes;
※ Do not use your hand to directly contact with the tube;
※ Please wear sterile gloves before using and use alcohol to wipe the quartz tube;
※ Please contact the manufacturer in time of use;
Capsule filters are produced using pleated processing. Their structure is impact and filter area is large, applicable to filter solutions that have slow flow rate and large volume. Capsule filters are sealed by means of melting, free from glues and adhesives and therefore will not contaminate filtrate. They will experience 100% integrity test, purified water washing, and pressure test before delivery. Materials of capsule filters are selectable.
Beijing Neuronbc was established in 2004. After more than ten years of development, At present, we have thousands of pharmaceutical enterprise customers, We believe our quality products and service, will be your correct choice.
The respirator filter is designed for the sterilization purposes when material pot gas exchange of the pharmaceutical industry, food industry. The vent of the material pot and the storage pot is separated by the filter, and the gas in the pot can be discharged smoothly, and the microorganisms and particulate of outside can not enter the inside. The filter is manufactured according to GMP standard. Filter selection of hydrophobic PTFE membrane, filtration accuracy of 0.01um for a variety of bacteria and phage to 99.9999% filter. This filter can do bubble point test, also be carried out online steam disinfection.
It is suitable for sealing integrity testing of pharmaceutical packaging to prevent moisture, oxygen, and microorganisms from contaminating products. Medicines: bottled, bagged, boxed, ampoules, vials, cartridges, prefilled needles (PFS), (BFS), (FFS), etc.
Spray cans: plunger spray cans; bag-lined spray cans; "energy jacket" spray cans; flexible tube spray cans.