0.3µm Primary purification rate of particulate matter
Wind speed m/s
Primary purification rate %
0.25µm Primary purification rate of particulate matter
Wind speed m/s
Primary purification rate %
1. Under the condition of test temperature 20 ~ 25 ℃ and relative humidity of 40-60%, the killing rate of Staphylococcus albus is 99.98% ,after artificially sprayed in the air of 20m3 airtight room in 90 minutes, and the natural decay rate of this bacterium is 45.45%, which meets the requirements of technical code for disinfection (2002)
2. Natural bacteria:
Results: under the condition of ambient temperature 20-24 ℃ , relative humidity 40-56% natural bacteria decay rate 98.78%in the air of 100 m3 in closed room after 90 minutes' .
PM2.5 purification Rate:
PM2.5 purification rate
Ozone concentration(outlet 5cm point)
Handhold Raman Spectrometer Model:Finder Edge -800 wave length 1064nm
The Model NBC-5150 can confirm the class of the clean room and print out the test results quickly, and meets ISO 14644 requirements. The instrument measures the no. of particles in 8 particle size channels simultaneously, with 5000 samples record storage. It is widely used in measuring particles in clean rooms and in evaluating the quality of indoor air. It also used for testing the performance of HEPA filters. It has a Stainless Steel Housing. It is very Portable.
Beijing Neuronbc was established in 2004. After more than ten years of development, At present, we have thousands of pharmaceutical enterprise customers, We believe our quality products and service, will be your correct choice.
The on-line glove integrity tester WGT-1200 produced by our company is designed according to the principle of the positive pressure leak detector recommended by GB/T 25915.7-2010/ISO 14644-7:2004. It is a special instrument for detecting leakage of gloves.
The on-line glove integrity tester WGT-1000 produced by our company is designed according to the principle of the positive pressure leak detector recommended by GB/T 25915.7-2010/ISO 14644-7:2004. It is a special instrument for detecting leakage of gloves. Our company has been engaged in the production and sales of filter integrity testers for many years, and the pressure control technology is very mature.
The device uses a wireless communication mode, built-in air pump and lithium battery, through systematic management, so that multiple detection units can be linked in real time. In addition to complying with the requirements of FDA and GMP and other laws and regulations, four-level authority management and electronic signature design are also set up to comply with 21CFR part 11 electronic records and electronic signature certification requirements; The history record can store more than 12000 groups, and at the same time, it has its own storage FLASH, which can transmit and save the test records in time; the structure design is simple and exquisite, no additional equipment is required, no need to remove gloves, and the glove tray can be replaced, supporting different specifications and sizes of gloves Detection. The high-precision pressure sensor is adopted, and the glove test is fast and accurate.
The respirator filter is designed for the sterilization purposes when material pot gas exchange of the pharmaceutical industry, food industry. The vent of the material pot and the storage pot is separated by the filter, and the gas in the pot can be discharged smoothly, and the microorganisms and particulate of outside can not enter the inside. The filter is manufactured according to GMP standard. Filter selection of hydrophobic PTFE membrane, filtration accuracy of 0.01um for a variety of bacteria and phage to 99.9999% filter. This filter can do bubble point test, also be carried out online steam disinfection.
TA - 3.0 independent research and development by our company which is to make a tiny adjustment on the basis of TA - 2.0, where the instrument shell adopts 304 stainless steel design,greatly improving the equipment
adaptability in different environments. It can meet the choice of two different schemes for the single point of real-time monitoring or multiple point time-division monitoring, not only meeting the requirements of national laws and regulations, but also saving investment, where we have several successful cases.
Kj1000f-a916 professional medical grade air purifier and sterilizer, with a purification rate of 100%. Core technology: high voltage electrostatic adsorption, virus removal, photocatalyst sterilization, UV lamp sterilization, plasma electrostatic gun to change the molecular structure to achieve sterilization and efficient filtration
Plate type filter consist of single plate and double plate, choose high-quality stainless steel 304 or 316L stainless steel, with a pressure tank or peristaltic pump as a source of pressure, is filtered by positive pressure, in full compliance with the GMP standard of the medicine industry, applicable to small pharmaceutical factory, food and beverage, factories and hospitals for liquid clarification and filtration sterilization. With a ladder shaped hose interface, easy to use.
The Model NBC-5160 can confirm the class of the clean room and print out the test results quickly, and meets ISO 14644 requirements. The instrument measures the no. of particles in 8 particle size channels simultaneously, with 5000 samples record storage. It is widely used in measuring particles in clean rooms and in evaluating the quality of indoor air. It also used for testing the performance of HEPA filters. It has a Stainless Steel Housing. It is very Portable.
Our company cooperated with National scientific research project group to complete the research and development, stereotype and production of “vaporized hydrogen peroxide sterilizer”. This sterilizer can vaporize the hydrogen peroxide to achieve the sterilization and disinfection effect, and the sterilization effect is faster and more efficient than the atomized hydrogen peroxide sterilizer, the using of it is safe and convenient.